The Bussmann™ series Quik-Spec™ Power Module Switch is an all-in-one elevator disconnect switch available in configurations to meet virtually any single elevator shutdown and disconnect requirement.

UL Branch Circuit Rated Fuses | Power Module Switches | Bussmann series | Eaton

Features:

• 30-400 amp 600 Vac 3-phase fused power switch

• 200 kA RMS Short-Circuit Current Rating (SCCR)

• Shunt trip 120 V

• Fire safety interface relay

• Fire alarm voltage monitoring relay (to monitor shunt trip voltage)

• Ground lug

• Class J fuse mounting only

• Mechanically interlocked auxiliary contacts for hydraulic elevators with battery backup (5 amp 120 Vac rated)

Ratings

• Volts - 208, 240, 480, 600 Vac

• Amps - 30, 60, 100, 200, 400

• SCCR - 200 kA RMS

Agency information

• UL® 98 enclosed and dead-front switch - Guide WIAX, WIAX7 (Canada), File E182262

• cULus, NEMA® 1, UL 50, Listed enclosure cUL per Canadian Standards C22.2, No. 0-M91-CAN/CSA® C22.2, No. 4-M89 enclosed switch

• U.B.C. and C.B.C. seismic qualified, and I.B.C. approved

Options:

• Control power transformer with fuses and blocks

• Key to test switch

• Pilot light – “ON”

• Isolated neutral lug2

• NEMA 3R, 4, and 12 enclosures

• Type 1 Surge Protection Device (SPD) - 50 kA surge current capacity

Quik-Spec power module switch resources found on Eaton.com:

Application notes

• Power Module Switch Section-16xxx specifications No. 3208

  Power Module Switch Section-16xxx specifications

Brochures

• Bussmann series Quik-Spec family of products brochure No. 10015

  A brochure on the Bussmann series Quik-Spec family of power distribution products including QSCP fusible panelboards, CUBEFuse safety switches, Power Module elevator disconnect switches and panels, and general information on selective coordination requirements of the National Electric Code® for Elevator Circuits: 620.62, Emergency Systems: 700.27, Legally Required Standby Systems: 701.18, Critical Operations Power Systems: 708.54, Essential Electrical Systems: 517.26.

Building Information Models

• Power Module Switch Building Information Modeling, NEMA-1

  Power Module Switch Building Information Modeling, NEMA-1

Product specification guides

• Bussmann series Power Modual elevator disconnect checklist no. 10724

  A list of six requirements to meet for complete elevator disconnect installation.

Helpful Bussmann Links:

• Bussmann series catalogs (eaton.com)

• Bussmann Tools

• Technical literature (eaton.com)

• Bussmann Fuseology handbook no. 10892 (based on the 2018 CSA CE code) (eaton.com)

• CAD drawing library (eaton.com)

• Bussmann series CCP2 fused switch application note no. 7038 (eaton.com)

• Data Center Circuit Protection Application Note # 10079 (eaton.com)

• CCP2 drawings (cooperwiring.com)

• Fuse to fuse and fuse to circuit breaker selective coordination application note No. 10454 (eaton.com)

• Solar Application Fuses (eaton.com)

• Fuses for Hazardous Locations # 3186 (eaton.com)