DCC-9 is the best solution to connect an EV charger to the feeder of a panel in an apartment or condo and in single-family homes where no additional breaker space is available. DCC-9 permits direct utility billing to unit for all electricity consumed by charging.

DCC-9, manufactured by Thermolec, is an EV Energy Management System specifically designed to allow the connection of a charger to the main feeder of the panel without affecting the load calculation.

Ideal for the installation of chargers in multi-residential buildings, such as apartments or condominiums.

Exterior installations will require DCC-9-3R.

How it works:
DCC-9 allows the connection of any EV charger to a fully loaded panel by managing the energy available at any given time.

1. DCC does a real-time reading of the total power consumption of a home or condo electrical panel;

2. It detects when the total power consumption of the main circuit breaker exceeds 80% and temporarily de-energizes the charger.

3. When DCC detects that the total power consumption of the electrical panel is less than 80% for more than 15 minutes it automatically re-energizes the charger.

DCC will only allow power to be delivered to the EV charger if the total demand of the panel is below its full capacity.

OPERATION

• Real-time reading of the total panel power consumption with pre-wired current transformers (CT).

• Detects when total power consumption exceeds 80% of main circuit breaker capacity and temporarily de-energizes the EV charger.

• Automatically re-energizes the EV charger when the total power consumption is less than 80% of main circuit breaker capacity for more than 15 minutes.

FEATURES

• Ideal when no more breaker slots are available in a panel

• Does not affect load calculation of a panel

• Automatic billing of electricity by the utility for multi-unit residential building installations.

• Can be ceiling or wall mounted.

• NEMA 3R enclosure available for outdoor installations.

INCLUDED

• Electric Vehicle Energy Management System

• Splitter Box (Max 125A)

• EV Charger Breaker (Max 60A)

• 2 Pre-Wired Current Transformers (CT)

About DCC

DCC is an electrical component specifically designed to allow the addition of an EV charging unit to an existing panel at a full load – but it is not an EV charger.

DCC-9 permits charger installations in condo’s/apartments where the electrical panel is physically far from the parking spot.

DCC-10 simplifies charger installation in a home where the panel is at a full capacity.